Portable Power Station, 296Wh 80000mAh Lithium Battery With 300W 600W Surge AC Outlets For Outdoor Camping RV Home,Camping Generator Solar

Four AC outlets, a 100W USB-C PD port, QC 3.0 charging, USB-A connections, DC outputs, and a 12V-style car socket provide versatile connectivity for compatible phones, laptops, cameras, drones, portable refrigerators, lighting, and other electronics.

Despite its versatile power capabilities, the unit weighs just 6.6 lbs and incorporates a carrying handle for convenient transportation. An integrated 18W emergency light with four operating modes provides additional functionality for camping, storms, roadside situations, and emergency preparedness.

296Wh Lithium-Ion Battery

The P302 incorporates a:

296Wh / 14.8V 20Ah Lithium-Ion Battery Pack

The supplier also markets the battery as 80,000mAh. Because amp-hour capacity changes depending on the voltage used for the calculation, 296Wh is the more useful specification for comparing portable power stations.

300W Rated / 600W Peak AC Output

The four integrated 110V AC outlets provide:

Rated AC Output: 300W
Peak Output: 600W

This makes the power station suitable for compatible lower-power electronics and appliances.

Always check the continuous and startup power requirements of a device before connecting it. Equipment requiring more than the power station's rated output may trigger overload protection or may not operate properly.

13 Power Output Ports

Connect multiple compatible devices using a total of 13 power outputs:

• 4 × 110V AC Outlets
• 1 × USB-C PD 100W Port
• 1 × QC 3.0 Port
• 2 × USB-A Ports
• 4 × DC Ports
• 1 × DC Car Socket

The variety of connection options makes the P302 useful as a centralized portable power source for camping gear, mobile electronics, photography equipment, and emergency supplies.

100W USB-C Power Delivery

A dedicated 100W USB-C PD port provides high-output charging for compatible USB-C equipment.

It can be useful for compatible laptops, tablets, smartphones, cameras, and other USB-C Power Delivery devices.

Actual charging power is determined by the connected device, cable, and supported charging protocol.

Multiple Recharging Options

The supplied information identifies several ways to recharge the power station:

AC Adapter: Recharge from household electrical power.

Vehicle Charging: Recharge using a compatible vehicle power outlet while traveling.

Battery Management System

An integrated Battery Management System (BMS) provides multiple electronic protection functions, including:

• Temperature monitoring/control
• Overvoltage protection
• Overcurrent protection
• Short-circuit protection
• Overload detection

These protections help manage the battery and connected equipment during operation but do not eliminate the need to follow the manufacturer's operating and charging instructions.

Built-In 18W Emergency Light

An integrated 18W emergency light on the rear of the power station provides additional illumination when conventional lighting isn't available.

The manufacturer specifies a beam distance of up to:

500 Meters / Approximately 1,640 Feet

Four lighting modes are available:

Low → Medium → High → SOS

This makes the integrated light useful for campsites, nighttime work, power outages, roadside situations, and emergency signaling.

Lightweight & Portable

At approximately:

6.6 lbs

the P302 combines portable battery capacity with a relatively lightweight design.

An integrated carrying handle makes it easier to move between the home, vehicle, campsite, RV, workshop, or emergency staging area.

Key Features

• 296Wh portable power station
• 14.8V 20Ah lithium-ion battery
• 300W rated AC output
• 600W peak output
• 13 total power output ports
• 4 × 110V AC outlets
• 100W USB-C PD port
• QC 3.0 charging port
• 2 × USB-A ports
• 4 × DC ports
• DC car socket
• AC adapter charging
• Vehicle charging capability
• Integrated Battery Management System
• Temperature protection
• Overvoltage protection
• Overcurrent protection
• Short-circuit protection
• Overload detection
• Built-in 18W emergency light
• 4 light modes
• Manufacturer-rated 500m light beam
• SOS lighting mode
• Integrated carrying handle
• Lightweight 6.6 lb design
• Useful for portable and emergency backup power

Great For

Power outages, emergency preparedness, camping, RV travel, road trips, hunting camps, photography equipment, drones, compatible portable refrigerators, laptops, smartphones, tablets, cameras, emergency lighting, storm preparedness, vehicle emergency kits, and off-grid recreational use.

Specifications

Model: P302
Product Type: Portable Power Station
Battery Chemistry: Lithium-Ion
Battery Capacity: 296Wh
Battery Rating: 14.8V / 20Ah
Advertised Equivalent Capacity: 80,000mAh
AC Voltage: 110V
Rated AC Output: 300W
Peak AC Output: 600W
Total Output Ports: 13
AC Outlets: 4
USB-C PD: 1 × 100W
QC 3.0: 1
USB-A Ports: 2
DC Ports: 4
DC Car Socket: 1
Battery Management System: Yes
Emergency Light: 18W
Lighting Modes: 4 – Low, Medium, High & SOS
Manufacturer-Rated Light Distance: Up to 500m / approximately 1,640 ft
Weight: 6.6 lbs
Carrying Handle: Yes

What's Included

Based on the supplied product information:

• 1 × P302 Portable Power Station
• 1 × AC Adapter & Cable
• 1 × USB-C to USB-C Cable
• 1 × Cigarette Lighter Plug Cord
• 1 × Car Cigarette Lighter Socket
• 1 × User Manual

The supplier also specifies 12 months of customer service.

Package Information

Number of Packages: 3

Important Power Information

The 300W rating is the continuous AC output limit, while 600W is the specified peak output. The 600W peak rating should not be interpreted as the amount of power the station can continuously supply.

Before connecting an appliance, check both its continuous operating wattage and startup/surge requirements.

High-wattage equipment such as conventional space heaters, electric kettles, hot plates, large coffee makers, hair dryers, and many cooking appliances typically exceed a 300W power station's capacity and should not be connected unless their actual requirements fall within the manufacturer's limits.

Battery & Charging Safety

Use the supplied or manufacturer-approved charging equipment and follow the product manual.

Do not expose the lithium-ion battery to fire, excessive heat, puncturing, crushing, or prolonged moisture. Keep ventilation openings unobstructed while charging or operating the unit.

Do not exceed the rated output or connect equipment with incompatible voltage requirements.

For emergency preparedness, periodically inspect and recharge the power station during storage. Lithium batteries naturally lose charge over time and should not be assumed to remain fully charged indefinitely.